U2C_RESULT U2C_SingleIoWrite( HANDLE hDevice, ULONG IoNumber, BOOL Value );
Handle to the U2C-12 device.
The number of the GPIO pin to set output value to:
- Numbers 0..7 correspond to Port A pins 0..7
- Numbers 8..15 correspond to Port B pins 0..7
- Number 16..23 correspond to Port C pins 0..7
The GPIO pin new output value.
The GPIO pin output value was successfully modified.
U2C-12 device referenced by hDevice handle was not found.
IoNumber is out of range.