USB-I2C/SPI/GPIO Interface Adapters
Published on USB-I2C/SPI/GPIO Interface Adapters (https://dlnware.com)

Home > User Manual > Installation & Using DLN Adapter in MS Windows > U2C-12 Compatibility with DLN-2 Adapter > DLN-2-U2C to DLN-2 Conversion

DLN-2-U2C to DLN-2 Conversion

It is possible to perform reverse conversion from DLN-2-U2C to DLN-2 adapter.

In this case, you need to download DLN Firmware Update (fw_update.exe) application from the Downloads [1] section of the www.dlnware.com [2] web site. Then close JP4 jumper on the board, plug-in board to USB, open JP4 jumper and run fw_update.exe. Choose latest available firmware version of DLN-2 adapter and press Upload button.

DLN Firmware Update application

Now you have original DLN-2 adapter which uses DLN driver and software.

In common, you can use DLN Firmware Update application for updating DLN-2 adapter as well as other DLN-series adapters you bought.
Rating: 
Average: 1 (1 vote)

Links:
[1] http://dlnware.com/Downloads
[2] http://www.dlnware.com/