Submitted by Scott_Calder on Tue, 06/24/2014 - 07:08
Forums:
Hi Diolan, We would like to use the Diolan DLN-4S connected via a bus-powered hub. Your electrical specifications state that the DC current is a maximum of 50mA, although I presume there is additional current required for driving I/Os which is dependent on the application. However, the USB descriptor for the DLN-4S says it requires 500mA. So when I plug it into my bus-powered hub (which will only supply 100mA per port) it will not install. * Do you expect the DLN-4S to operate plugged into a bus-powered hub? Thanks, Scott.
Rate: